| AquaCone
The
AquaCone Is a floating water purifier that distills any naturally
occurring water into safe drinking water. There is no pumping involved
and no filters to clog. The AquaCone Is lightweight, fully portable
and makes enough for a daily supply of safe drinking water, while
requiring only solar energy to power it.
The AquaCone can remove a vast range of contaminates, and has no
moving parts. It can also be used at night to distill water from
sufficiently warm source water. It can also be used when steam is
created from a heated water source, such as a when heated rocks
are placed in a pot of water.
Why Does
The World Need An AquaCone Distiller?
Most of us take a safe water supply for granted. However, when disaster
strikes, clean water is the most fragile of all resources. Whether
as the result of an earthquake, hurricane, flood, biological or
technological crisis, the risk of contaminated water supplies is
very real.
Untreated water will expose you to diseases such as Giardia, Cholera
or Hepatitis. Alternative water sources, such as lakes and streams,
can commonly carry diseases as well. Solar distillation is natures
way of recycling water through the ecosystem, also known as "natures
water cycle".
Combining lightweight durability with convenient, compact portability,
the AquaCone is able to distill virtually any water, anywhere, to
provide a safe and reliable source of drinking water. It is a unique
device that can use the sun to evaporate water from almost any source.
The AquaCone has no moving parts to break and no filters to clog,
and requires no fuel or electricity. Once set up, it does not need
constant monitoring.
By providing third world countries a solar powered personal water
distiller, fewer people will get sick and die from drinking contaminated
water. Fewer forests will be devastated by populations that cut
trees to burn wood for boiling water.
The AquaCone is a necessary addition to any boating kit, survival
pack, or disaster preparedness kit. When collapsed, its rolled up
size is just 21 Long by 6 in diameter and weighs less
than 5 pounds. The condensing cone is made out of durable and UV
protected polyurethane film.
The AquaCone is literally a lifesaver in any situation where only
salty or polluted water is available. It is capable of removing
a very wide variety of contaminates including biological pathogens,
heavy metals, salts, and other chemicals. This is an important feature,
due to its ability to produce purified water from water which has
unknown levels and types of pollutants.
|
| The
AquaCone Design
The AquaCone is designed to float on any water source and may be
used on oceans, lakes, or pools. It even has the ability to evaporate
water from green plant material or damp earth, and also condense
distilled water from any source of steam.
The AquaCone is designed to purify water directly from the source.
It operates by floating on a body of contaminated water, using the
sun to evaporate and purify it. The AquaCone utilizes the same water
purification cycle found in nature-evaporation, condensation, and
precipitation-driven by the energy of the sun.
The AquaCone condenser is constructed of extremely tough and flexible
polyurethane film. This material is approved for potable water storage
by the Food and Drug Administration (FDA) and is specially formulated
to resist damage from the suns ultraviolet rays.
The AquaCone comes in two parts, a condensing cone assembly and
an inflatable-insulating floor. The cone assembly consists of a
transparent cone welded to an integrated support tube and clean
water collection pocket. The inflatable floor has an evaporative
wick attached to its top surface.
The floor sits underneath the cone and is composed of an inflatable
insulator attached to an evaporative surface which is kept warm
by insulating it from the source water.
When gently dropped on a body of water the AquaCones dome
inflates itself, supported by the air pressure inside. Under windy
conditions support poles may be added.
How Does
It Work?
The AquaCone uses only the power of the sun. Set it out, and let
it go. The unique design not only captures the energy of the sun
during the day, but at night as well. The temperature difference
between sun-warmed water and cool night air is exploited to produce
yet more water up to a liter or more, over and above normal
daytime production. |
- Solar
energy is produced by sunlight.
- Sunlight
shines through the transparent AquaCone.
- An
evaporative wick (water soaked pad) is warmed.
- Drops
of water adhere to the wicks fine fibers creating a large surface area
for evaporation. This causes the air inside the cone to become saturated
with water vapor.
- Moist,
heated air travels upward until it contacts the surface of
the cone.
- Pure,
uncontaminated water droplets roll down into a collection pocket around
the rim of the AquaCone.
- The
pure water can be drained through a valve.
- The
water can also be sipped from a tube that is supplied.
This
process leaves all impurities behind in the wick, which can easily be
detached and cleaned. Each AquaCone should make 1.5 to 2.5 liters of distilled
water on a typical sunny day of operation. Amounts of water will vary
depending on where you are located in the world, how much solar radiation
is available, the source water temperature and the air temperature.
U.S.
and foreign patents pending |
|